New

Creasing

CYKLOS Air Speed 450

8765 98Euro

Send an inquiry

Automatic machine for creasing, perforation and spirals

Original way of air feeding

Speed 3000 sheets/hour

Easy change of work tools

Cross and jump perforation/slitting

60 management programs

Large selection of punching / Wire-O spiral options

Useful

The structural sectional view of the paper

THE RIGHT CHOICE OF PAPER Pay attention to the processes following printing: - Dense coatings cause difficulties in su ...

To the article

Description
A wide selection of processes in one machine's body. The strength of the vacuum and fanning of the sheets is adjusted automatically, depending on the shape and density of the paper, but fine adjustments can also be made. The loading height of the feed tray is large - 70 mm. When you want to make creasing, you can choose between two thicknesses of the creasing bar: CITO 1.0 for papers of 80-200 g/m2 and metal creasing channel for 200-400 g/m2. The step of the creases can be with a distance of min. 1 mm., max. 999 mm. For perforation, you have the option to do it on paper with a thickness between 80-250 gr./m2 (or 0.2 - 0.4 mm thickness).
Multifunctional automatic creaser. Programmable universal machine for punching, perforating and die-cutting with vacuum feeder. Among the finishing bow ties of its class, it stands out with the rare possibility to make perforations for calendars. Despite its compact size, the Cyklos AirSpeed ​​450 has an impressive feed speed of 3,000 sheets per hour (A4 sheets). This unique system allows processing all types of paper from 80 to 400 g/m2. We believe that this machine is a good choice for many digital and offset printers that print small formats and where not only books, brochures, folders, postcards and other products are produced in small or medium runs, but also calendars.
Convenient control screen for process management. The Cyklos AirSpeed 450 has a multilingual programmable 18 cm control screen, through which the parameters of the work that the machine has to perform can be set. Determining where the start of the sheet is, the machine automatically positions the sheet according to the program under the knife for either creasing or perforating. If a correction needs to be made - it is done easily and quickly.
The perforating knife itself is made of forged iron and has a long service life, so you can rest assured of the quality of perforating, regardless of the load on the knife. For the convenience of the operator, there are built-in programs for perforation 1/2, 1/3, 1/4 and for a soft book cover. This is apart from the ability to store 60 individual work programs.
The relatively large maximum format for work, 456x800 mm, allows to be used not make prints from digital printers, but also with offset ones. It should be noted that longitudinally you can do perforation, creasing and fine slitting (max. for creasing 40, and for perforation and slitting up to 15 per punch per sheet), while transversely you can perforate and punch/die-cutting (max. hits 13 per sheet). The Cyklos AirSpeed ​​450 stands out for its versatility and versatility. There are practically no competitors in its category that offer both spiral hole punching and making a moon on calendar heads.

Technical parameters
  • Model of machine for creasing, perforation and punching
  • Max. media size1 (W x L) 456 x 800 mm
  • Min. media size1 (W x L) 115 x 210 mm
  • Density of the creasing media3 80 - 450 g/m2
  • Media density at perforation3 80 - 250 g/m2
  • Density of the media when punching 80 - 400 g/m2
  • Max. crimping speed2 up to 3000 per hour
  • Tool drive programmable, electric
  • Width of creasing channel CITO 1.0 mm for media with density < 0.4 mm (80-200 g/m2)
  • Width of the creasing "Metal channel" 1.9 mm for media with a density of 0.4 - 0.5 mm (200-400 g/m2)
  • Step for positioning of the crease3 1- 999 mm between them
  • Work programs 60 for the various processes
  • Possibility to make test possible
  • The set includes tools 2 creases, 1 perforation, 1 rotary perf, and slitter knife + stand
  • Movement frictional of the feed tray
  • Additional tools (for punching/spirals) square 2:1 - 5x5 / 6x6 mm, 3:1- 4x4 / 4x4 mm 3:1 with moon; circle diam. 4 mm; 3:1 and 4mm; 3.1 with moon; oval 5x4 mm (for plastic spiral); punching euro hole, zamba, rounding; microperforation (9 TPI ​​and 30 TPI) full or partial
  • Feed of the media automatically from the tray
  • El. parameters 230 V AC, 50-60 Hz, 2A, 400 Watts
  • Dimensions of the machine (WxDxH) 1320 x 755 x 475 (1225 if on a stand) mm
  • Package dimensions (WxDxH) 1200 x 800 x 721 mm
  • Weight netto140 kg. / gross 189 kg.

1 Depends on media type. Density may be affected by room temperature.
2 Single big. Build time depends on operator experience and operating settings.
3 They are included as standard in the package.

PS. Design and specifications are subject to change without prior notice. The technical data is approximate. Possible changes in price without a notice.

NOTE. We strive description, photos and specifications to be completely authentic. Unfortunately, due to the large number of items/devices that are presented, it is inevitable that sometimes errors appear, especially when information is translated from/into multiple languages. Please let us know if you notice a mistake. Thank you in advance.

Accessories
Easy to change spiral hole punching tools. Over 11 different drill types are available. Please see the brochure attached to the article for a description of the different types.
In addition to crimping and punching holes for spirals, attachments are available for punching or making photo albums. You can even make Euroholes!
With our perforating and/or cutting attachments, you can partially or completely perforate the media.
Video
Useful

The structural sectional view of the paper

THE RIGHT CHOICE OF PAPER Pay attention to the processes following printing: - Dense coatings cause difficulties in su ...

To the article