Straight blade

IDEAL 4860

7193 87Euro

Send an inquiry

New cutting width

Electro-mechanical blade and clamp drive

Multilingual operator guidance and digital display

99 programs with 99 steps in each program

IR light beam safety curtain


Why HSS type of steel is being used to make knives guillotines?

High-speed steel High-speed steel (HSS or HS) is a subset of tool steels, commonly used in tool bits and cutting tools. It is ...

To the article

Ideal 4860 is professional guillotine with EASY-CUT, automatic clamp, programmable power backgauge with touch pad and IR light beam safety curtain on the front table. The IDEAL 4860 is a fully featured programmable guillotine. Capable of cutting the full range of materials in large formats up to B3. Fully electronic operation of both the knife and clamp offer effortless cutting performance. Whilst the pre-clamping function allows operators to check the cut position before activating the knife. Optional side tables allow the work area to be expanded which provides useful extra workable space around the operator and further enhances productivity.
The Ideal Safety Cutting System (SCS) includes the latest Infra-Red Safety Curtain technology at the front while a fixed steel cover protects the rear of the guillotine. In addition a self-diagnosis system pin points any faults which may need attention. Optical cutting line with bright and durable LEDs. Convenient two-hand operation via patented two-step blade activating bars with separate trigger points for blade and clamp. Self-diagnostic system with error indication on display. Clamp guided on both sides for evenly distributed clamping pressure. Spindle guided backgauge for precise positioning.
Comprehensive SCS safety package: IR light beam safety curtain on the front table; safety cover on the rear table; main switch and safety lock with key; electronically controlled true two-hand operation; 24 volt controls (low voltage); patented safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from the outside of the machine; easy blade change from the front of the machine without removing covers. Electric backgauge drive with touch pad for easy setting, multilingual operator guidance and digital display
The Touch Screen display allows operators to quickly enter an exact size, select or program their own pre-set sizes, or enter one of a possible 99 programs for future recall. The patented Easy Cut paddle twin hand activation for the blade and clamp is ergonomically designed and ensure even over sustained periods of use the operator remains comfortable. A clear RED Led cut line indicator and electronically controlled paper push function with manual fine positioning complete the package.
Programmable EJECT function - for pushing out the paper. Self-diagnostic system with error indication on display. Electronic hand wheel for manual backgauge positioning with infinitely variable speed control (from very slow to very fast). Electro-mechanical blade and clamp drive. Sindle guided backgauge for precise positioning. Blade made of German high quality steel. Solid steel blade carrier and adjustable blade guides.
Adjustable backgauge with narrow separations and plastic gliders. Optical cutting line with bright and durable LEDs. Three-step front table illumination (LEDs). Two side lays each on front and rear tables. Solid all-metal construction. Complete with stand, storage shelf, practical tool holder and stacking angle. Optional set of side tables available at an extra cost. Quality "Made in Germany"
Quality does not come out of the blue! It comes from Krug & Priester. When it comes to the quality of our products, we leave nothing to chance. We have a policy of sustainability through tradition and conviction. For more than 70 years – and for many years to come. Conceived in Germany. Made in Germany since Wilhelm Krug and Ludwig Priester founded the company on 1 July 1951. We, Krug & Priester develop and produce our products exclusively at our headquarters in Balingen at the foot of the Swabian Alps – with an almost 90 per cent vertical range of manufacture. Products from Krug & Priester are particularly straightforward and convenient to use, leaving you more time to focus on the key issues.
Measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch). 99 programs with 99 steps in each program (up to 15 repeat cuts can be integrated into a program as one single program step). Program runs automatically. 10-button key pad for presetting of measurement. Pre-programmed measurements for A3 to A6 standard paper sizes. Memory key for repeat cuts. Automatic SET function for reference measurement via start button.

Technical parameters
  • Cutting lenght up to 475 mm
  • Cutting hight 80 mm
  • Blade and paper clamping  electro-mechanical
  • Table depth backside  450 mm
  • Narrow cut 35 mm
  • Power connection in volts 230 V / 50 Hz 
  • Power 1,1 кW (blade drive) / 0,32 kW (clamp drive) / 0,1 kW (Backgauge drive)
  • Dimensions (H x W x D)  1296 x 762 x 992 mm
  • Dimensions with side tables (H x W x D) 1349 х 762 х 992 mm
  • Nett weight + side tables 232 / 241 kg.
  • EAN 44019364327117
  • Order Number 48613111
  • GS certificate1 yes

Design and specifications are subject to change without prior notice. Side table is an option, should be ordered separately. The technical data is approximate. Possible changes in price without a notice.

¹ The Geprüfte Sicherheit ("Tested Safety") or GS mark is a voluntary certification mark for technical equipment. It indicates that the equipment meets German and, if available, European safety requirements for such devices. The main difference between GS and CE mark is that the compliance with the European safety requirements has been tested and certified by a state-approved independent body. CE marking, in contrast, is issued for the signing of a declaration that the product is in compliance with European legislation. The GS mark is based on the German Equipment and Product Safety Act ("Geräte- und Produktsicherheitsgesetz", or "GPSG". Although the GS mark was designed with the German market in mind, it appears on a large proportion of electronic products and machinery sold elsewhere in the world.

PS. We strive description, photos and specifications to be completely authentic. Unfortunately, due to the large number of items that are available, it is inevitable that sometimes errors appear. Please let us know if you notice a mistake. Thank you in advance.

A convenient but not essential option for better and more efficient work is the presence of side extension tables for the guillotine. They help you to put - move - sort the paper you work with more effectively. They can also be purchased after having machine, and their installation is easy and does not require special technical abilities. Please inquire about the correct model and part number to ensure you purchase the correct guillotine mount.
Stacking angle of alignment or knocked paper before being cut off with the guillotine. The height of the angle is specifically tailored to the height of the guillotine cut and can therefore put it inside the cutter. It is made of impregnated holder with a plastic pad below to ensure a uniform knock. Recommended if you want to reduce marriage in your business.
Guillotine knife (blade) for Krug & Priester (ЕBA and IDEAL brands). The blade is made of High Speed Steel (HSS) material for heavy duty and trouble free operation. It has unmatched sharpness and cutting with high wear resistance. Manufactured to high precision in a modern manufacturing plant in Germany. Suitable for cutting of all kinds of paper, boards, foils, rubbers and other materials for print and paper industry.
Guillotine Changing Holder . Specially designed to minimize the likelihood of injury. It is easy to remove the blade or transport it for sharpening if you do not have a cannon.
Original cutting stick is made from special material, which corespond to purpose to protect on maximum the edge of the cutting blade. Based on our experience usingthe factory-made cutting stick is prolongthe "life" of the blade between 20-30%, before to be dismounted for re-sharpening.
Recommended consumables

Why HSS type of steel is being used to make knives guillotines?

High-speed steel High-speed steel (HSS or HS) is a subset of tool steels, commonly used in tool bits and cutting tools. It is ...

To the article