The new Multifinisher Touchline CPC375 XPRO sets a new standard in the industry. It is the result of extensive research and experience in the field of post-press, with which it aims to meet the desire of most of our customers to have "one machine that does it all"! At that time, the combination of several different processes, combined with high processing speed and independent control and compact size - was a big challenge to every manufacturer of finishing machines in printing. Swiss engineering thought did a great job with it, as evidenced by the presence of over 1,400 installations worldwide.
TOUCHLINE CPC375 XPRO&TF375 XPRO is a good combination of two modules working in sync. The first module (CPC) - creases, cuts and perforates the paper at the serious speed of 1500 - 6000 sheets per part. The large range in speed is because the more tasks there are in the work program, the lower the speed. The second module (TF) - its strength is the 7 different types of paper folding and separation when it is brought out either on the conveyor above or in the tray below. This new innovation fulfills many of the industry's desires for greater efficiency and speed. The original innovative system features patented, quick-change tools/attachments, depending on the order. All of them are electronically detected and automatically set up for operation.
Rotary tools. Up to four perforating or
slitting heads are available; all of them plug and play. The setup will be done within just a few seconds on the touch-screen control panel.
At the moment, we are not aware of a faster digital device on the market that can cut business cards, brochures, catalogs to order at such high (and respectable) speed. The machine is standardly equipped with 6 cutting heads, each of which has 2 disc knives. When creating the work recipe, they quickly occupy the necessary position and allow to develop a speed of up to 6000 cuts per hour (depending on the complexity of the task - the speed may vary). Their setting is done in just a few seconds on the touch screen control panel. The life of the cutting discs is long and calculated at approximately one million - one and a half million cycles. To emphasize the Swiss craftsmanship and their importance, they are even colored in the colors of the Swiss flag! The heads do not need special maintenance and/or periodic cleaning - they are always ready to "crack the head" on the paper ;-)
Better to see than to write in a hundred words! Here we show everything that the first module of the machine (CPC XPRO) can do. Please note that not all of the operations shown are included as standard in the price of the machine and which are optional. The machine offers really wide range of work possibilities, but not necessarily everything it can do is what you need. That's why some of the things are displayed as an option.
Multigraf’s inspiration for this new product line was given by its name - TOUCHLINE. Press the button and off you go! By simply entering the necessary information through the touch-screen, the machine creates all settings automatically. A small, centralised, multifunctional operating panel offers all necessary functions for a fast production start. On the control screen, it will practically not read a word or a sentence. The entire menu consists of clear pictograms to avoid the risk of wrong planning or handling of the machine. You don't need knowledge of foreign languages to use it!
To save another hundred words text, we show you what the second module of the machine does ;-)
TOUCHLINE CPC375 XPRO&TF375 XPRO can be used as an integrated creaser/perforator performing both functions in one single pass, as a stand-alone creaser or as a perforator when no other operation is required. A revolution in the optimization of virtually all major finishing processes! The machine does 7 separate operations at once with just one media pass. CUTTING (from 4 sides) - CREASING (bottom and top) - PERFORATION (cross and lengthwise) - CUTTING (slitting & scoring) - FOLDING (2 or 3 folds).
TOUCHLINE CPC375 XPRO&TCF375 XPRO is a fast and powerful system for all essential finishing processes, which works with paper weighing from 80 to 400 g/m2 and punches materials with perforations up to 300 g/m2. The machine can be used either as an integrated machine for cutting/creasing/perforating/folding operations or as a stand-alone: cutting,creasing,perforating or folding when only this operation is required.
The machine incorporates the unique Multigraf Swingbar system for creasing without cracking. Sheets do not stop during the creasing process. Automated crease depth setting with 3 different crease depths is another fantastic feature of the TOUCHLINE CP375 DUO § TF375. This new technology allows for the acceleration of the work process.
TOUCHLINE CPC375 XPRO&TF375 XPRO is equipped with a feeder using "vacuum belt" technology and air knife control for perfect leaf separation. There is noneed of additional air pump. This offers a lower noise level in the working environment in the room. The maximum sheet size can be up to 375 x 1050 mm. The current generation of "Touchline" machines offers more flexibility and automation than any other product in paper finishing. "Touchline" stands for efficient and automated processes in creasing, perforating (across the sheet and lengthwise), cutting and folding; all in one go. The good thing (and this is their big advantage) is that all Touchline models can be connected to work in sync with different printing and/or post-press systems to offer automated complex finishing operations at the push of a button.
This is the output part of the TF375 XPRO, which redirects the processed media to the corresponding output according to the set program. When there is a fold in the recipe - the media exits from the top side, where there is an automatic conveyor belt that adjusts to the speed and shape of the final product, thus, bringing it out of the machine, stacks and groups it. It is recommended that when you have all other processes, but no folding, that you set the media output to the bottom of the sorting tray. The machine allows, when planning the job, to be able to stop for a short time so that the displayed finished product can be picked up by the operator for packing or further sorting without worry. It is most often activated when there is folding involved in the job (regardless of how many folds). The bottom output comes into play when your processes are mainly creasing, perforating or just cutting. There, the collection table can be extended to such a length that products up to 70 cm long can be collected.
All the machines of the Multigraph company are manufactured in Switzerland, in the small town called Muri (Canton Allgau). Each machine goes through several days of heavy-duty testing to protect the renowned Swiss build quality. We can promise you that your machine is manufactured to the highest quality standard that exists. This is the reason why we offer, as an alternative, a warranty of up to 60 months on each machine. This means millions of cycles and hundreds of thousands of sheets of production, and why not also millions of sheets of production!
Multigraf AG in Muri is with its 40 years of experience a reliable partner for ambitious quality-conscious printers and for each user a future-proof decision. A variety of first-class products combines maximum flexibility with maximum modularity. Our experience makes Multigraf AG an ideal partner for successful printing houses.
